Garment Measuring method
The important information about which is very important to know before sewing and cutting and after machine information and maintenance is the technique of measurement. The cloth needs to be harvested before the chest and the drafting before cutting and the measurement before drafting. In fact, the foundation of stitch-cutting depends on the size
The correct fitting of garments depends on the correct size. If the measurement itself is wrong or faulty, the fitting of the stitched garment is not correct. That is why the measurement should be taken carefully and carefully. One should never be in a hurry to take a measure, or should the measure be considered just a mine.
The human body is not the same due to the dynastic effect. There is a difference in the size of every human being. Often the size of the body parts is in a certain proportion, which is known to the cloth chest by practice. But still, it is necessary to measure and if the organs are not in proportion, then the cloth should be cut with special care.
Stitched clothes should not be measured. You can measure the stitched fabric in compulsion. It would be appropriate to measure this fabric when the measuring gasket clearly insists on the correct fitting of the stitched fabric. However, as a precaution, any deficiency should be asked by the customer. While measuring, ask the customer how he wants the fitting of the fabric, the tie or loose.
The fitting of the fabric depends on the wearer. So one thing should be asked according to his interest. The customer should be observed carefully while measuring. His body structure should be tested whether the client's body is ordinary or extraordinary. The measurement should be done according to the body's texture.
The measurements of the body should be taken in a sequence like a shirt, kurta, burst
1. Take the first length.
2. Measure the chest.
3. Measure the diameter.
4. Measure the abdomen (in fat women or men).
5. Measure the hips.
6. Measure the arrowhead.
7. Take the length of the arm.
8. Measure the sluice of the arm.
9. Measure the throat.
10. Measure the armpits (if needed).
After taking all these measurements, measurements of pants, salwar, pajamas should also be taken in sequence.
1. Measure the length.
2. Measure the waist.
3. Measure the hips.
4. Measure the kidney.
5. Measure the seal.
This is the way to measure, which is explained to you above. Many people take the opposite - straight, zigzag - ram which is wrong. The choli should be measured while measuring children and women. The person who is being measured should stand in a very ordinary state. Standing too tight or too loose causes a difference in size.
The tailor should take the measure from the small leaf end of the tape and measure it on the same side on the inch, where only the marks of the inch are marked. The measurement should be written on a copy according to the inches.
While measuring, sometimes half - quarter, the quarter also comes in inch tap. Often there are mistakes in writing it, which emerge clearly in the fitting of the fabric and the fitting is not fit according to the body, so they should come the way of writing.
1. quarter = 1/4
2. Half = 1/2
3.Summer = 1/4
Let's take a look at these. As if the length of the shirt is forty-two and a half, we will write 42 1/2 of it. If the size of the chest is a quarter and thirty-five inches, then the method of writing this measurement will be 35 1/4. If the throat is one-third to thirteen inches, then it will be written 12 3/4.
Remember them well in your mind. The measurement should always be taken from the right side of the person and in front of the body. Do not take any measurements other than the waist too tightly. With each measurement, keep one section of your finger looses within the inch tap.
If the number of clothes lying on the body while taking measurements, such as a coat, sweater, jacket, etc., should be measured in winter, then they should be answered. The fitting of the fabric depends on the wearer, whether the fitting is tight or loose. Loose-fitting is good for growing children and old people. How lose it depends on the pace of development of the child and the demand for design.
The measurements should be taken sequentially from one side only. The customer should not rotate or move left or right. Information about your skill is available from here, how knowledgeable you are in the field of stitching. While measuring the throat, inch tap should be measured by taking it around the throat, and while measuring
One finger should be stuck in the middle. Do not forget to ask the throat tight or loose customer. This is the detailed information on the measurement of the upper part of the shirt. Now also pay attention to the measurement of salwar, pants, pajama.
1. Length:
Asking the customer where they tie salwar, pants, or pajamas should be kept in place and measured to the feet. The customer should stand upright while measuring.
2. Waist:
Waist size is taken only for men's pants. Yes, if the measurement of women's pants is being taken, then the sequence will run the same. Salwar or pajamas do not require waist measurement. At the waist, where the pants are to be tied, bring the inch tap from the front to the back and bring it forward. Must ask the customer about tight and loose
3. Hips:
Like the waist, the hips (seat) also have to be measured in the pant. There is no need to measure the seat in salwar or pajamas. The method of measuring is according to the method of measuring the waist.
4. Asanas or Gidari:
Gidri's measurement in Pant has a special significance of its own. In this, the customer has to open both legs lightly and from where both the legs meet, the longleaf part of the inch tap is placed at the bottom where the length of the pant is to be measured. The method of measuring the vulture of the pant of women is completely different from that of men. The measurement of the femoral head is taken from the point where the pant is tied, that is, by placing tape at the waist, where the two legs meet, they take the measurement (ie, the measurement of the men’s heel from where it starts, the height of the femoral fat is there) Ends). After taking the measurement, the full measure of posture is reduced by subtracting the size of the woman's gland from the full length of the pant.
Trousers size:
Measurements of length and sealing are taken only to measure pajamas and salwar. Male pajamas are made in three ways -
1. Plain pajamas,
2.Paint - cut pajamas and
3. Nehru cut pajamas or churidar pajamas.
(2) The number and (1) the pajamas of the number is measured in length and sealing. But for churidar pajamas, along with the length, the heel of the foot, the calf is measured below the knee. The length of such pajamas is kept 10 or 12 inches longer than the length of ordinary pajamas which gather near the bottom.
